4/38 D no stock item. Procurement takes place after receipt of order. a = delivery by carrier + = fraction of the PU possible You will find the explanation of the symbols before the index. Abrasives Professional polishing system for discerning users This offer describes professional polishing tools and pastes for finishing steel, stainless steel and non-ferrous metals Drills, flexible shafts, angle polishers and stationary polishing benches are ideal driving tools. Optimal cutting speeds of 20 to 30 metres/second. Max. revolution of 4,000 rpm. Optimum polishing generally takes place in three steps: Pre-polishing After precise grinding (at least 280 grit), pre-polishing is the most important step and has a major impact on the final result. Steel and stainless steel is pre-polished with a sisal cloth/polishing ring combination and a white polishing paste. Sisal cloth Surface after pre-polishing: Polishing Polishing removes the traces of the previous work step. Hard non-wovens on patented Notiflex® polishing rings, consisting of high-quality randomly positioned non-wovens, are used. The key benefit: no irritating seams, no fraying, less pressure is required, lower temperature development and up to 30% less paste consumption compared to conventional cloth rings. White pastes are used for steel and stainless steel, while brown paste is used for non-ferrous metals. Notiflex® 914 Oberfläche nach dem Polieren: High-gloss polishing A soft Notiflex® polishing ring and gentle contact pressure together with a fine, blue paste (for all metals). Notiflex® 925 Surface after high-gloss polishing: Step 1 Pre-polish, Sisal cloth Step 2 Polish, Notiflex® 914 Step 3 High-gloss polish, Notiflex® 925 Stainless steel Polishing paste, white Polishing paste, blue Non-ferrous metals Polishing paste, brown
RkJQdWJsaXNoZXIy ODY1MjQ=