8/203 Unless otherwise stated, delivery without content/ accessories. The offers are only valid for commercial customers. All prices excluding VAT. Technical products Nominal width DN Nominal pressure PN Thickness [mm] Dimensions [mm] PU Article no. EUR CK 65 10-40 2 127 x 77 10 4577 770 155 1,75 1) TC88 80 10-40 2 142 x 89 10 4577 770 156 1,95 1) TC88 100 25-40 2 168 x 115 10 4577 770 157 2,45 1) TC88 125 6 2 182 x 141 10 4577 770 158 2,55 1) TC88 150 10 2 218 x 169 10 4577 770 160 3,35 1) TC88 200 10 2 273 x 220 10 4577 770 161 4,65 1) TC88 250 10 2 328 x 273 10 4577 770 162 6,25 1) TC88 1) price per pc. Flat sealing ring KLINGERsil® C-4400 DIN2690 Type: High-pressure Area of use: Universal high-pressure seal with various applications in the chemical industry and in food processing as well as Drinking water supply · Very high performance standard · Resistant to oil, water, vapour, gas, salt solutions, fuels, alcohols, organic and inorganic acids, hydrocarbons, lubricants and refrigerants Material: NBR-bonded aramid fibre Approvals: BAM tested, DIN-DVGW, DIN-DVGW W 270, DVGW VP 401, Elastomer Directive, ÖVGW reg. no. G 1.912, DNV GL, TA-Luft, Fire-Safe gem. DIN EN ISO 10497 Temperature range: Up to +400 °C Thickness [mm] Dimensions [mm] PU Article no. EUR CK 1 18 x 12 30 4577 770 165 0,25 1) TC88 1 21 x 17 30 4577 770 166 0,25 1) TC88 1 21.5 x 17.5 30 4577 770 167 0,25 1) TC88 1 24 x 16 30 4577 770 168 0,30 1) TC88 1 25 x 21 30 4577 770 169 0,30 1) TC88 1 32 x 27 30 4577 770 170 0,35 1) TC88 1 38 x 27 30 4577 770 171 0,35 1) TC88 1 39 x 30 30 4577 770 172 0,40 1) TC88 1) price per pc. Flat sealing ring Vulcanised fibre · Red · Hard, non-splintering composite material based on pulp · Comprised of paper fibres · Properties: High mechanical strength, heat-resistant, good insulation, resistant to oils and greases, high elasticity Length [m] Width [mm] Thickness [mm] PU Article no. EUR CK 25 3 1.5 25 4566 600 420 0,90 1) TC88 25 5 2.0 25 4566 600 423 1,35 1) TC88 25 7 2.5 25 4566 600 426 2,00 1) TC88 50 7 2.5 50 4566 600 427 1,75 1) TC88 10 10 3.0 10 4566 600 428 2,95 1) TC88 25 10 3.0 25 4566 600 429 2,95 1) TC88 50 10 3.0 50 4566 600 430 2,95 1) TC88 25 12 4.0 25 4566 600 432 3,85 1) TC88 10 14 5.0 10 4566 600 433 5,25 1) TC88 25 14 5.0 25 4566 600 434 5,25 1) TC88 25 17 6.0 25 4566 600 437 7,75 1) TC88 5 20 7.0 5 4566 600 438 10,95 1) TC88 10 20 7.0 10 4566 600 439 10,95 1) TC88 1) price per m, PU in m Flat sealing tape 4360 Can also be used as a seal under high chemical exposure and temperatures · On space-saving roll · High chemical resistance · No ageing · Weather and light resistant · Efficient sealing of uneven surfaces · Minimum standstill times – easy installation · Self-adhesive on one side Contents Article no. EUR CK 300-part 4000 367 011 60,95 1) TU08 1) price per set Sealing ring assortment Copper · For oil drain plugs · Suitable for all common vehicles · 10 pc. each in the following sizes Inside x outside diameter x thickness: 5 x 9 x 1.0 mm/6 x 10 x 1.0 mm/6 x 12 x 1.0 mm/8 x 12 x 1.0 mm/8 x 14 x 1.0 mm/8 x 14 x 1.5 mm/9 x 14 x 1.0 mm/10 x 14 x 1.0 mm/10 x 14 x 1.5 mm/10 x 16 x 1.0 mm/12 x 16 x 1.0 mm/12 x 16 x 1.5 mm/12 x 18 x 1.5 mm/13 x 18 x 1.0 mm/14 x 18 x 1.5 mm/14 x 20 x 1.5 mm/14 x 20 x 2.0 mm/16 x 20 x 1.5 mm/16 x 22 x 1.5 mm/18 x 22 x 1.5 mm/18 x 24 x 1.5 mm/20 x 24.5 x 1.5 mm/20 x 24.5 x 0.8 mm/19 x 26 x 2.0 mm/22 x 27 x 1.5 mm/22 x 29 x 1.5 mm/24 x 29 x 1.5 mm/24 x 32 x 2.0 mm/26 x 34 x 2.0 mm/28 x 36 x 2.0 mm Supplied in component box Contents Article no. EUR CK 419-part 4000 367 003 18,95 1) TU08 1) price per set O-ring assortment Made of NBR · Resistant to acid, petrol, heat and oil · Not suitable for drinking water Inside diameter: - 20 pc. Ø 3 mm, thickness 1.5 mm - 20 pc. Ø 4.5 mm, thickness 2 mm - 18 pc. Ø 5 mm, thickness 2 mm - 23 pc. Ø 7 mm, thickness 1.5 mm - 23 pc. Ø 10 mm, thickness 1.5 mm - 23 pc. Ø 13 mm, thickness 1.5 mm - 14 pc. Ø 10 mm, thickness 2.5 mm - 13 pc. Ø 11 mm, thickness 2.5 mm - 14 pc. Ø 13 mm, thickness 2.5 mm - 13 pc. Ø 14 mm, thickness 2.5 mm - 14 pc. Ø 16 mm, thickness 2.5 mm - 14 pc. Ø 18 mm, thickness 2.5 mm - 13 pc. Ø 19 mm, thickness 2.5 mm - 14 pc. Ø 21 mm, thickness 2.5 mm - 13 pc. Ø 22 mm, thickness 2.5 mm - 10 pc. Ø 18 mm, thickness 3.5 mm - 10 pc. Ø 20 mm, thickness 3.5 mm - 10 pc. Ø 22 mm, thickness 3.5 mm - 10 pc. Ø 23.5 mm, thickness 3.5 mm- 10 pc. Ø 25 mm, thickness 3.5 mm - 10 pc. Ø 26.5 mm, thickness 3.5 mm- 10 pc. Ø 28 mm, thickness 3.5 mm - 10 pc. Ø 30 mm, thickness 3.5 mm - 10 pc. Ø 31 mm, thickness 3.5 mm - 10 pc. Ø 33 mm, thickness 3.5 mm - 10 pc. Ø 34.5 mm, thickness 3.5 mm - 10 pc. Ø 36 mm, thickness 3.5 mm - 10 pc. Ø 38 mm, thickness 3.5 mm - 10 pc. Ø 41 mm, thickness 3.5 mm - 10 pc. Ø 44 mm, thickness 3.5 mm - 10 pc. Ø 47 mm, thickness 3.5 mm - 10 pc. Ø 50 mm, thickness 3.5 mm Area of use: Universally usable in plant and apparatus construction (as an assembly aid), food production, medical engineering, pharmaceuticals and biotechnology, flue gas systems, power station and utility pipes and cables, chemical and dye industry, inspection glasses, etc. Material: 100 % virgin, expanded PTFE (soft, flexible) Operating temperature: From -240 °C to +270 °C (temporarily up to +315 °C) Approvals: Physiologically safe, tasteless, odourless, cannot be attacked or destroyed by micro-organisms. Compliance with the requirements under FDA Guideline 21CFR 177.1550 and EU Regulation No. 1935/2004
RkJQdWJsaXNoZXIy ODY1MjQ=