8/130 SDB Kennzeichnungsfrei SDB SDB SDB D no stock item. Procurement takes place after receipt of order. a = delivery by carrier + = fraction of the PU possible You will find the explanation of the symbols before the index. Technical products Contents [g] Container Colour Article no. EUR CK 50 Pump dispensing bottle Yellow 4000 353 919 17,25 PH00 Pipe thread sealant Medium-strength, high-viscosity · The pipe thread sealant secures and seals the screw thread against gas, water, hydrocarbons, oil, liquid gas and many chemicals · Replaces hemp and solid seals · Parts can be realigned immediately after joining · High-quality seal · Additional corrosion protection · For screw connections up to M80 · Gap filling capacity 0.5 mm · Handling strength: 15–30 minutes · Functional strength: 1–3 h · Temperature range from -55 °C to +150 °C · Can be used in the marine industry, pump construction, sanitary construction, tractor construction, the engine and electrical industry, turbines and nuclear power stations, mechanical engineering and transmission construction, the food industry, mining, gasworks, waterworks and electricity works, etc. · DVGW approved The pump dispenser enables simple dosing: No drips or continued discharge, no residues, precise dosing Contents [ml] Container Colour Article no. EUR CK 50 Pen Yellow 4000 349 515 22,95 TU95 Pipe/thread seal, medium strength WEICONLOCK® AN 305-77 Does not require CLP labelling · With DVGW approval · NSF P1 registered (Reg. No. 159910) · BAM tested and safety assessed · For gaseous oxygen · High viscosity (24,000-70,000 mPa.s) · Normal dismantling capability · Gap bridging: Max. 0.50 mm · Thread size: Up to M 80 R 3” · Breakaway torque: 18–22 Nm (determined for screws M 10, quality 8.8, nut height 0.8.d) · Handling strength between 15–30 min, (at room temperature) · Final strength after 1–3 hours (at room temperature) · Temperature-resistant from -60 °C to +150 °C Contents [ml] Container Colour Article no. EUR CK 50 Pen Brown 4000 349 511 30,95 TU95 Hydraulic/pneumatic seal, medium strength WEICONLOCK® AN 305-42 Universal application · With DVGW approval · Medium-strength · Normal dismantling capability · Gap bridging: Max. 0.15 mm · Thread size: Up to M 20 R ¾” · Breakaway torque: 12–15 Nm (determined for screws M 10, quality 8.8, nut height 0.8.d) · Handling strength between 10–20 min, (at room temperature) · Final strength after 2–4 hours (at room temperature) · Temperature-resistant from -60 °C to +150 °C Contents [g] Container Colour Article no. EUR CK 50 Bottle Red 4000 352 003 16,25 PH00 Surface sealant Thixotropic properties mean it can be used on vertical surfaces · Seals against low pressure (approx. 5 bar) immediately after joining the parts · Viscosity: 50,000 to 250,000 mPas (25 °C) · Gap filling capacity: 0.5 mm · Strength class DIN 30661: 2 · Tensile strength: 7 to 10 Nm · Shear strength to DIN 54452 8-13 Nm, load 7–10 Nm · Temperature-resistant from -55 °C to +150 °C · Handling strength after approx. 10 to 20 min. · Functional strength after 1 to 3 h · The surface sealant has a high pressure resistance immediately after the handling strength is reached · Max. pressure sealing capacity up to 350 bar; is achieved after full curing under exclusion of oxygen · Very good gap bridging · For use in the automotive industry, chemical and petrochemical industries, gasworks, waterworks and electricity works, pump construction, drilling platforms, etc. Contents [ml] Container Colour PU Article no. EUR CK 50 Pen Red 12 + 8000 250 703 22,95 1) TU95 1) price per pc. Surface sealant WEICONLOCK® AN 305-18 Immediate seal · High-strength · High viscosity (80,000–500,000 mPa.s) · Difficult to dismantle · Gap bridging: Max. 0.5 mm · Breakaway torque: 12–18 Nm (determined for screws M 10, quality 8.8, nut height 0.8.d) · Handling strength between 10–20 min. (at room temperature) · Final strength after 3–6 hours (at room temperature) · Temperature-resistant from -60 °C to +200 °C Contents [ml] Container Colour Article no. EUR CK 50 Pen White 4000 349 513 17,25 TU95 Pipe/surface sealant WEICONLOCK® AN 305-72 With PTFE · DVGW tested · Instant sealing effect, also at low pressures · High viscosity (17,000–50,000 mPa.s) · Normal dismantling capability · Gap bridging: Max. 0.40 mm · Thread size: Up to M 80 R 3” · Breakaway torque: 7–10 Nm (determined for screws M 10, quality 8.8, nut height 0.8.d) · Temperature-resistant from -60 °C to +150 °C · Handling strength between 20–40 min. (at room temperature) · Final strength after 5–10 hours (at room temperature)
RkJQdWJsaXNoZXIy ODY1MjQ=