Unless otherwise stated, delivery without content/ accessories. The offers are only valid for commercial customers. All prices excluding VAT. Hand tools Contents For screws Article no. EUR CK 5-part M 3–M 18 4000 867 851 5,25 WU10 6-part M 3–M 24 4000 867 852 6,50 WU10 Screw extractor set Carbon steel · Screw extractor with counter-clockwise rotation · Drill into the broken screw, insert the extractor and rotate counter-clockwise to remove the remaining screw section Supplied in plastic box Contents For screws Article no. EUR CK 5-part M3–M18 4000 767 425 24,95 WC28 6-part M3–M24 4000 767 426 29,95 WC28 8-part M3–M45 4000 767 427 59,95 WC28 Screw extractor set Baureihe 49 In finely ribbed German shape · Better traction · For removing broken screws with right-hand thread Contents For screws Article no. EUR CK 5-part M5–M20 4000 812 300 37,95 WX23 Screw extractor set For the damage-free removal of broken screws and threaded bolts from bore holes · For use on the left- and right-hand threads · Made of CV steel Application: Predrill screw, strike extractor into the bore hole · Remove screw Contents For screws Article no. EUR CK 25-part M5–M16 4157 540 049 145,00 WC28 Screw extractor set For removing broken screws and bolts · Complete with screw extractors, HSS twist drills and drill/guide bushing for problem-free boring, even for broken parts deep in threaded holes Contents: 1 of each item: Attachment nut AF 10 / 11 / 13 / 14 / 17 mm Profile pin 3.2 / 4.8 / 6.4 / 8.0 / 8.7 mm HSS twist drill 3.2 / 4.8 / 6.4 / 8.0 / 8.6 mm Drill bush 6 mm / 3.2 mm, 8 mm / 3.2 mm, 9 mm / 3.2 mm, 10.0 mm / 3.2 mm Drill bush 10 mm / 4.8 mm, 11 mm / 4.8 mm, 12 mm / 4.8 mm, 13 mm / 4.8 mm Drill bush 13 mm / 6.4 mm / 14 mm / 6.4 mm Case with inlay Supplied in plastic case Working principle: First, a small hole is drilled into the part to be removedwith HSS twist drills (see table) and enlarged to the dimension required for the extractor pin to be used. If the screwor bolt protrudes or has broken o deep in the threaded hole, the right twist drill guide bushing (selection table in box lid) must be placed in front of the broken part and the hole is drilled through this. The extractor pin is then driven into the hole and thematching extractor nut is attached.The part is removed from the threaded hole by rotating it counter clockwise. 6/253
RkJQdWJsaXNoZXIy ODY1MjQ=